PT241P-B 24mm Thermal Printing Printer Head Supplier for POS Terminals PT241
• Low voltage supply
The voltage used to drive the thermal printer head is equal to the logic voltage, or is driven by a 5 V single power line, the range of operating is 4.2V-8.5V, so four to six NI-Cd batteries or Ni-MH batteries can also be used. Two li-ion batteries can be used.
• Compact and lightweight design
The mechanism is compact and light, dimensions: 45.2mm (width) * 32.7mm (depth) * 15.1mm (height)
• Printing with high resolution
A high-density printer head of 8 dots/mm makes the good printing quality
• High speed printing
According to driving power and sensitivity of thermal paper, set different printing speed required. Printing speed is 80 mm/ s (max.)
• Easy paper loading
Detachable rubber roller structure makess the paper loading easier
• Low noise
Thermal line dot printing is used to guarantee low noise printing.
• Cash registers
• EFT POS terminals
• Portable terminals
• Measuring devices
• Medical equipment
• Taxi meters
• Weighing scales
| Model | PT241 |
| PRINTING CHARACTERISTICS | |
| Print Method | Direct line thermal |
| Resolution | 8 dots/mm |
| Max. Printing Width | 24mm |
| Number of Dots | 192 |
| Paper Width | 32.5±0.5mm |
| Max. Printing Speed | 80mm/s |
| Paper Path | Curved |
| DETECTION | |
| Head Temperature | By thermistor |
| Paper Out | By photo sensor |
| Black Mark | By photo sensor |
| Platen Open | NA |
| POWER SUPPLY | |
| TPH Logic Voltage | 2.7V-5.5V |
| Drive Voltage | 4.2V – 8.5V |
| PEAK CURRENT | |
| Head(Max.) | 4.0A(8.5V/64dots) |
| Motor | Max. 420mA |
| RELIABILITY | |
| Pulse Activation | 100 million |
| Abrasion Resistance | 50KM |
| ENVIRONMENTAL | |
| Operating Temperature | 0 – 50℃ |
| PHYSICAL CHARACTERISTICS | |
| Dimensions(W*D*H) | 45.2*32.7*15.1 mm |
| Mass | 32g |