PRT 2 inch PT488A-B Mobile Printer Thermal Printer Mechanism for ECR Cash Register
♦ Low voltage supply
The voltage used to drive the thermal printer head is equal to the logic voltage, or is driven by a 5 V single power line, the range of operating voltage is 4.2V-8.5V, so four to six NI-Cd batteries or Ni-MH batteries can also be used. Two li-ion batteries can be used.
♦ Compact and lightweight design
The mechanism is compact and light, dimensions:68.0mm (width) * 24.4mm (depth) * 25.6mm (height)
♦ Printing with high resolution
A high-density printer head of 8 dots/mm makes the good printing quality
♦ High speed printing
According to driving power and sensitivity of thermal paper, set different printing speed required. Printing speed is 90 mm/ s (max.)
♦ Easy paper loading
Detachable rubber roller structure makess the paper loading easier
♦ Low noise
Thermal line dot printing is used to guarantee low noise printing.
| Series Model | PT488A-B |
| PRINTING CHARACTERISTICS | |
| Print Method | Direct line thermal |
| Resolution | 8 dots/mm |
| Max. Printing Width | 48mm |
| Number of Dots | 384 |
| Paper Width | 57.5±0.5mm |
| Max. Printing Speed | 90mm/s |
| Paper Path | Curved |
| DETECTION | |
| Head Temperature | By thermistor |
| Paper Out | By photo sensor |
| Platen Open | NA |
| POWER SUPPLY | |
| TPH Logic Voltage | 2.7V-5.5V |
| Drive Voltage | 4.2V – 9.5V |
| PEAK CURRENT | |
| Head(Max.) | 3.56A(9.5V/64dots |
| Motor | 500mA |
| RELIABILITY | |
| Pulse Activation | 100 million |
| Abrasion Resistance | 50KM |
| ENVIRONMENTAL | |
| Operating Temperature | 0 – 50℃ |
| PHYSICAL CHARACTERISTICS | |
| Dimensions(W*D*H) | 68.0*24.4*25.6mm |
| Mass | 30g |